Predicted flight path for KK6PUZ-1 on Saturday March, 14, 2015
College Amateur Radio APRS aboard the Cal High Altitude Balloon Launch this Saturday 3/14 from the Main Glade – Come Join Us!
This Saturday around 12pm Pacific (1900UTC) as part of the “Pi Day” celebration (which will be STEM-focused) the Space Exploration Society at Berkeley will launch a High Altitude Balloon from the main glade at the Cal Campus. The launch team is planning for the craft to attain an altitude of around 100,000 feet and at present the flight time will be around 3 hours (and then it will descend with an estimated touch-down at 2153UTC).
Please feel free to pass this along to your friends, family, and associates! Can you help spread the word? 🙂
AMATEUR RADIO ON BOARD
The balloon will have a GPS-enabled Amateur radio Packet Reporting System (APRS) tracker on-board transmitting at 144.390MHz (the national APRS frequency for 2m) using the callsign KK6PUZ-1 which belongs to Cal Planetary Sciences student Kareem Shaik. So if you run an APRS iGate in the area from Berkeley to Copperopolis, or you’ve been looking for a good reason to set one up, get ready for Pi Day!
There will be other systems on-board for photography and telemetry. You can also track the balloon while in-flight at the High Altitude Balloon Hub.
We could really use some help with tracking and recovering this balloon. If you know people in the area, please invite them to participate as well. We are still needing to pull together a few items, including the APRS antenna for the balloon as well as an antenna for the live video feed.
Here’s a chance to put many aspects of ham radio to use:
APRS
Fox-hunting
Signal triangulation
Mobile radio net
Antenna modeling/building
Batteries in extreme conditions
Abiding by regulations including those of the FAA
YOUR imagination !!!
UPDATE (20151110): the balloon and its payload were safely recovered the day after the launch by Jason, KK6OQW who contacted us, and we drove out to Tracy to make the exchange. The excitement in the chase vehicles was immense. It’s like geocaching, scavenger hunting, road-tripping, ham radio, mobile NASA Ground Control/Tracking, geekfest, physics-meets-poetry, BEYOND THE CLASSROOM. This is the sort of experience that imprints for life.Without further ado, here are the videos:
A photo Jason KK6OQW took of the SESB-1/KK6PUZ landing site.
Unboxing of the SainSonic AP510 APRS Tracker with Built-in GPS Module, 1W VHF Transceiver Module, VHF Antenna, Bluetooth, Thermometer, and TF Card Support. Price was around $130 shipped (and fast).
There’s that initial bump but now that I’ve set up one I could set up a hundred. Once you get the latest firmware flashed into the tracker via the USB port, you run the config program and use the suggested settings found on the Yahoo Group (or just bug me for a screen shot).
$130 and this thing WORKS as advertised. No mess of wires. Great battery life. You can connect to it via Bluetooth (so you can run it in KISS mode from your smartphone or tablet). GPS is FAST! The case is SOLID! Stock antenna isn’t that impressive but that’s easily remedied. I also soldered the antenna connector since some goofball thought it was a good idea to use a male SMA connector with the spinning sleeve BEHIND the case. 🙂
And of course it would be cool to somehow get on the Heard MHeard list as well (rimshot).
Something like this would be a no-brainer to attach to an amp to get a bit more than 1-watt out.
I’m thinking of ruggedizing my AP510 further by putting into a Pelican case (with room for a 35watt 2M amp and a weatherize pass-through hole for either sealed Anderson Powerpoles or just a wire or bolt bus). I’m definitely going to take this setup on the 20 mile FAGES II Scout Hike through Tilden Park and Wildcat Canyon this year. And of course several other field testings.
The battery is lithium Ion and seems to hold a charge while beaconing for over 24 hours. This can be easily extended with a cheap USB charging pack that could extend you for several DAYS. Of course you can use anything with a USB port to charge it. Well, almost anything (don’t plug it into a Raspberry Pi USB port directly).
Also running a quarter wave GROUND wire works wonders on the signal. Having a good antenna even better. But I’ve been tracked with it in my sport jacket inside pocket and the stock antenna while walking between buildings.
Seems like it would be something we could have the team use for the Heard Island 2015 Expedition (VK0EK). I guess I’m going to have to try it out from within my freezer overnight. 🙂
OK, that was cool, and easy. Using UISS by ON6MU, I was able to receive packets from the International Space Station for a few days on 145.825MHz. This evening I was able to connect to the RS0ISS-11 packet BBS (and was quickly reminded it was for the CREW only [oops, sorry, QLF]). Nonetheless, it was a valid round-trip QSO to and from the International Space Station.
Gear used:
I was using my Yaesu FT-857D at 50watts into a diagonally-oriented J-pole. LOL. This particular pass’s max elevation was 18 degrees. This is so much easier than even trying to work the LEOs with voice!
Here’s a screen shot of the happenings:
Posted in APRS, ARISS, satellites, space | Comments Off on My first contact with the International Space Station RS0ISS-11
73 and Go (Cal) Bears!